SENSKY 19.7ft/6m Motion Activated LED Strip Light Kit for Gun Safe, Under Cabinet, Under Bed, Pantry, Kitchen, Stairway, Closet Lighting ( White 6000-6500K)
- 【Motion Activated Strip Light】 : Motion Sensor switch turn light on or off by human induction. You can open the back cover of the sensor to adjust time delay(2-280s), LUX value(10-300lux), Sensor distance (10cm-7M)
- 【Power Adapter】: UL listed power adapter run on DC 12V, safe to children, Efficiency Level V.
- 【High Brightness and Long Life LED】: While normal LED brightness is 5-6 lm/LED, We use high brightness LED: 6-7lm/LED to ensure better lighting. 50000+ hours of long life.
- 【Strong Tape and Easy Installation】: Backed with strong double side tape, stick firmly to walls. You can easily cut the desired length, and this motion sensor strip light is ultra thin fits perfectly in the narrow corners of the cabinets and around the wall.
- 【Seller warranty and Customer Service】: You can enjoy worry-free shopping with SENSKY by our 12 months satisfaction guarantee, if you're not satisfied, just message us and we will make things right. Plus, we've a picture on how avoide the most common problem on using motion sensor switch and led strip light, please read it carefully before using.
Details: Sensky Motion Sensor LED Under Cabinet Lighting Kit Extendable Under Counter LED Light with Motion Sensor, Power Adapter for Closet, Shelf, Show Case, TV wall Lighting ( 19.7ft ,6000-6500k ) 1.Why you need a Motion Activated LED Strip Light Kit ? It provides a cost efficient alternative compared to traditional electric incandescent lamp. 2.How it works ? A: Automatic turn on/off the lights by human induction: The Under Cabinet Lighting kit comes with a pir motion sensor switch. When people enter into the sensing range, the light will turn on, during the delay time if motion detected, the delay time will reset and start a new delay time. If no further motion, the light will turn off. B: Directly turn on/off the lights by pressing the switch, The Under Cabinet Lighting comes with an on/off switch. 3.Tips for wiring ? 1.Power adapter + on / off switch+ led strip 2.Power adapter + PIR sensor switch+ led strip 3.Power adapter PIR sensor switch+ on / off switch led strip Specification Power Adapter: Input: 100-240VAC 50/60HZ Power: 30W Output: 12VDC 2.5A Connect Max LED strip length: 6.5M LED strip: Length of Strip Light: 6m/roll Rated Power: 4.8W/m Input Voltage: DC 12V LED Type: SMD 2835 High brightness LED: 6-7lm/LED Waterproof grade: Non-Waterproof BS010L PIR Motion Sensor Switch: Operating voltage: DC12V-25V Load current: 3A Delay time: default setting 4-5min(2-280s adjustable) Sensitivity: 4M-7M (10cm-7M adjustable), 110 degrees cone angle Light sensor : 300lux (10-300lux adjustable) Note: 1) The PIR sensor switch only works in dark environment according to the default setting. 2) Do make sure there is no dust, oil or water on the surface
Package Dimensions: 7.6 x 6.6 x 2.3 inches